Best Sell Electric Wireless Floor Sweeper 1850W Magnet Sweeper Cleaning up for Street Factory Warehouse

The KS13 is designed for medium industrial, logistics and commercial cleaning areas. Its 1,280mm sweeping width and rated efficiency of up to 6,500m²/h make it suitable for factories, warehouses, parking areas, industrial roads, campuses and logistics facilities.

The theoretical coverage is approximately 19,500–26,000m² per charge. This estimate is calculated from the rated efficiency of 6,500m²/h and the specified working time of 3–4 hours. Actual coverage will be lower because of turning, overlapping, hopper unloading, obstacles, gradients and operating speed.

The KS13 is more compact than larger industrial sweepers, but all access points must still be measured. The machine measures 1,500 × 1,125 × 1,300mm. Buyers should check gates, warehouse doors, aisles, elevators, turning areas, charging locations and storage entrances before purchase.

The KS13 uses two side brushes together with a 600mm main brush. The side brushes direct debris from the outer edges toward the central collection path, while the main brush transfers it into the hopper. Brush material should be selected according to dust, leaves, sand or heavier debris.

Yes, the 120L hopper provides practical capacity for medium industrial cleaning routes. Actual operating time between unloads depends on debris type and density. Bulky leaves and packaging waste may fill the hopper faster than fine dust, small stones or sand.

The listed climbing capability is below 30%, but the safe working gradient must be confirmed for the actual site. Performance varies with battery charge, surface traction, hopper load and driving direction. Buyers should request the rated operating gradient, braking specification and slope-safety instructions before using the machine on ramps.

The KS13 uses a 48V electrical system and a 1,000W drive motor. It also lists an 850W roller-brush motor. Battery capacity, battery chemistry and charging time are not confirmed in the supplied parameter sheet, so buyers should verify these details together with charger voltage and plug type.

The supplied parameters do not state the filtration area, filter-cleaning method or water-spray configuration. For dusty factories and outdoor roads, buyers should confirm the filter area, filter material, electric filter shaker, spray system, water-tank capacity and replacement-filter availability before ordering.

The KS13 requires planned freight handling because it weighs 380kg and measures 1,500 × 1,125 × 1,300mm. Confirm packed dimensions, gross weight, forklift points, loading method, container requirements, battery shipping documents and destination-site unloading equipment before shipment.

Confirm the complete battery, dust-control, safety, consumable and shipping configuration in writing. The purchase specification should include battery capacity and chemistry, charger voltage and plug, filter area, filter-cleaning system, spray system, working gradient, braking system, brush materials, spare brushes and filters, warranty terms, packaging details and replacement-parts availability.