High Performance Ride on Floor Sweeper 48V Battery Powered Road Sweeper Suitable for Factory Warehouse Parking Lot

The BC140 is designed for medium and large industrial, logistics and outdoor cleaning areas. Its 1,400mm sweeping width and rated efficiency of up to 12,600m²/h make it suitable for factories, warehouses, logistics centers, parking facilities, industrial roads and commercial campuses.

The theoretical coverage is approximately 37,800–63,000m² per charge. This estimate is calculated from the rated efficiency of 12,600m²/h and the specified working time of 3–5 hours. Actual coverage will be lower because of turning, overlapping, hopper unloading, obstacles, gradients and operating speed.

The BC140 requires access routes at least as wide as its 1,400mm machine body. The complete dimensions are 1,950 × 1,400 × 2,050mm. Buyers should measure gates, warehouse doors, aisles, height restrictions, turning areas, charging locations and storage entrances before purchase.

The supplied data confirms a 600W main-brush motor and two 140W side-brush motors, but it does not provide a complete 2,400W power breakdown. The remaining rated power may include the drive motor, fan or other electrical systems. Buyers should request a complete motor list and electrical schematic before comparing energy consumption or replacement components.

The 80L hopper is suitable for routine medium-to-large cleaning routes, but unloading frequency depends heavily on debris type. Fine dust and sand may allow longer routes, while bulky leaves, packaging waste and larger debris can fill the hopper more quickly. Buyers should compare capacity with the actual site waste stream.

The listed climbing capability is below 25%, but the safe operating gradient must be confirmed for the actual site. Performance varies with battery charge, surface traction, hopper load and driving direction. Buyers should request the rated working gradient, braking specification and slope-safety instructions before using it on ramps.

The BC140 has a listed maximum working speed of 11km/h and is configured as a powered ride-on sweeper. Actual sweeping speed should be reduced for dusty, congested or heavily contaminated areas. Buyers should confirm drive-motor power, reverse speed, braking system and traction performance on wet or sloped surfaces.

The confirmed specification is a 48V battery system with a stated working time of 3–5 hours. Battery capacity, chemistry and charging time are not included in the supplied parameter sheet. Confirm the amp-hour rating, lead-acid or lithium configuration, charger voltage, plug type and replacement-battery availability before ordering.

The supplied parameters do not state the filter area, filter-cleaning method or water-spray configuration. For dusty factories and outdoor roads, buyers should confirm the filter area, filter material, electric filter shaker, suction fan, spray system, water-tank capacity and replacement-filter availability.

Confirm the full motor, battery, dust-control, safety and shipping configuration in writing. The purchase specification should include the complete 2,400W power breakdown, battery capacity and chemistry, charger voltage and plug, filtration system, working gradient, braking system, supplied brushes, spare filters, warranty terms, packed dimensions, gross weight and unloading requirements.