Large Ride on Semi Enclosed Sweeper 48V 100AH Lithium Battery Electric Road Sweeper for Industrial Warehousing

The KS17 is designed for large industrial, logistics and outdoor cleaning areas. Its 2,100mm sweeping width and rated efficiency of up to 14,000m²/h make it suitable for factories, logistics parks, large warehouses, parking areas, industrial roads, campuses and municipal cleaning projects.

The theoretical coverage is approximately 84,000–112,000m² per charge. This estimate is calculated from the rated efficiency of 14,000m²/h and the specified working time of 6–8 hours. Actual coverage will be lower because of turning, overlapping, hopper unloading, obstacles, gradients and operating speed.

The wide sweeping path is suitable for open areas, but all access routes must be measured before purchase. The complete machine measures 2,400 × 2,000 × 2,000mm. Buyers should check gates, warehouse doors, internal aisles, turning areas, charging locations and storage entrances before confirming an order.

The KS17 uses four side brushes together with an 800mm main brush. The side brushes direct debris from outer edges toward the central collection path, while the main brush transfers it into the hopper. Brush material should be selected according to dust, leaves, sand or heavier industrial debris.

Yes, the 200L hopper is designed to reduce unloading frequency during large-area sweeping. Actual operating time between unloads depends on debris type and density. Bulky leaves and packaging waste may fill the hopper faster than fine dust, small stones or sand.

The listed climbing capability is below 25%, but the safe working gradient must be confirmed for the actual site. Performance varies with battery charge, surface traction, hopper load and driving direction. Buyers should request the rated working gradient, braking specification and slope-safety instructions before using the machine on ramps.

The KS17 uses a 48V electrical system and a 1,800W drive motor. It also lists an 850W roller-brush motor. Battery capacity, battery chemistry and charging time are not confirmed in the supplied parameter sheet, so these details must be verified together with charger voltage and plug type.

The supplied parameters do not state the filtration area, filter-cleaning method or water-spray configuration. For dusty factories and outdoor roads, buyers should confirm the filter area, filter material, electric filter shaker, spray system, water-tank capacity and replacement-filter availability before ordering.

The KS17 requires planned freight handling because it weighs 658kg and measures 2,400 × 2,000 × 2,000mm. Confirm packed dimensions, gross weight, forklift points, loading method, container or flat-rack requirements, battery shipping documents and destination-site unloading equipment before shipment.

Confirm the complete battery, dust-control, safety, consumable and shipping configuration in writing. The purchase specification should include battery capacity and chemistry, charger voltage and plug, filter area, filter-cleaning system, spray system, working gradient, braking system, brush materials, spare brushes and filters, warranty terms, packaging details and replacement-parts availability.