Fully Enclosed Floor Sweeper Industrial Self-propelled Electric Road Sweeper for Industrial Warehousing

The KS19 is designed for large industrial, logistics and outdoor cleaning areas. Its 1,990mm sweeping width and rated efficiency of up to 14,000m²/h make it suitable for factories, logistics parks, large warehouses, parking areas, industrial roads, campuses and municipal cleaning projects.

The theoretical coverage is approximately 56,000–84,000m² per charge. This estimate is calculated from the rated efficiency of 14,000m²/h and the specified operating time of 4–6 hours. Actual coverage will be lower because of turning, overlapping, hopper unloading, obstacles, gradients and operating speed.

The wide cleaning path is suitable for open areas, but access routes must be measured before purchase. The complete machine measures 2,200 × 1,900 × 1,900mm. Buyers should check gates, warehouse doors, elevators, internal aisles, turning areas and storage entrances rather than relying only on the sweeping-width figure.

The KS19 uses four side brushes together with a 700mm main brush. The side brushes move debris from outer edges toward the central collection path, while the main brush transfers it into the hopper. Buyers should confirm brush material options for dust, leaves, sand or heavier industrial debris.

Yes, the 180L hopper is intended to reduce unloading frequency during large-area sweeping. Actual operating time between unloads depends on debris density and type. Bulky leaves and packaging waste may fill the hopper faster than fine dust or sand, so buyers should evaluate the hopper against their real waste stream.

The listed climbing capability is below 25%, but the safe operating gradient must be confirmed for the actual site. Gradient performance varies with battery charge, surface traction, load and driving direction. Buyers should request the rated working gradient, parking brake specification and slope-safety instructions before using the machine on ramps.

The KS19 uses a 48V electrical system and a 1,800W drive motor. It also lists an 850W roller-brush motor. Battery capacity, chemistry and charging time are not included in the supplied specifications, so buyers should confirm these details together with charger voltage and plug type.

The supplied parameter sheet does not state the filter area, filter-cleaning method or water-spray configuration. For dusty factories and outdoor roads, buyers should confirm the filtration area, electric filter shaker, spray system, water-tank capacity, filter type and availability of replacement filters before ordering.

The KS19 requires planned freight handling because it weighs 750kg and measures 2,200 × 1,900 × 1,900mm. Confirm the packed dimensions, gross weight, loading method, forklift points, container type, battery shipping requirements and destination-site unloading equipment before arranging international transport.

Confirm the full battery, dust-control, safety, consumable and shipping configuration in writing. The purchase specification should include battery capacity and chemistry, charger voltage and plug, filter area, filter-cleaning system, spray system, working gradient, braking system, brush materials, spare brushes and filters, warranty terms, packaging dimensions and replacement-parts availability.